Facebook Pixel

Connecting...

Kerry Duggan

Senior Consultant
W1siziisijiwmtcvmtevmjmvmtyvntgvmtkvmzi3l0tlcnj5ier1z2dhbi5qcgcixsxbinailcj0ahvtyiisijq1mhg0ntajil1d
  1. 07495 536784
  2. kerry.duggan@jonlee.co.uk
  3. Linkedin profile
  4. @JonLee_Recruit

Kerry has more than 12 years’ experience within the recruitment industry with over 8 years expertise searching and placing technical engineering roles for leading brands in the UK automotive arena.

Highly professional and motivated, Kerry has developed excellent automotive engineering knowledge which has helped her to deliver against a high number of assignments for clients.

Experience in the contract recruitment process providing support and guidance to candidates who are taking the next step of their career or relocating to the UK.

Having recruited for the automotive sector for many years, she has developed a reputation for providing exceptional level of services to contractors and clients alike.

Browse Kerry's latest jobs

Graduate Automotive Project Engineer - 34997

Position Description: Opportunity for a high calibre post graduate with little or no experience to work as part of a dynamic team in a supporting technical role. Opportunity to develop and progress if behaviours and technical ability meet business requirements. Skills Required: Hard working and diligent Self-management skills Ability to work alone or as part of a team Experience Required: No previous experience required but must be Degree qualified and of potential to develop Education Preferred: Electrical or electronic qualification preferable Additional Information: Must have full driving license and be mobile across Midland sites

Contract / Coventry, West Midlands

Cockpit TVM Engineer - 34979

Position Description: Cockpit TVM Engineer. TVM (Total Value Management) Introduce programme of engineering changes that achieve Cockpit team unit cost reduction target. Key coordinator managing delivery of a programme of engineering changes, across all Jaguar and Land Rover vehicle lines, that will enable the Cockpit team to meet its Annual unit cost saving target. Run weekly status reviews with each supplier and key stake holders. These meetings will be used to Progress feasibility studies for feasible actions. Generate all data required to support release of feasible actions. Manage on time introduction of changes. Release of TVM changes into the system. CAD support will be provided by Cockpit team. Additional releasing support will be found from the Cockpit team if volume of changes exceeds the capacity of the TVM Lead Engineer. In this case the TVM lead will monitor progress of these releases. The Lead Engineer will engage with all key stake holders and Departments to ensure all changes are implemented without detrimental effect to Quality and volume production. Skills Required: Proven Programme management capability within automotive industry. Experience in a cost reduction role will be desirable. Knowledge of Technologies employed within Cockpit systems. Plastic moulding experience being a key requirement. Experience with automotive part releasing process's and ability to review CAD data. Experience Required: History of successful Project management delivery of technical programmes, ideally in the automotive sector or adjacent industries e.g. rail, aerospace, defence, metals and minerals, energy etc. Strong PC literacy, Microsoft project, power point, Excel, Word etc. Education Required: Ideally Degree educated.

Contract / Gaydon, Warwickshire

Body Structures Lead Engineer - 34980

Position Description: Lead Engineer for the Rear Lids Structure and Trim department within Body Engineering to launch vehicle programmes with responsibility for BIW closures and casting components. Skills Required: Proven project management and launch capability within the Automotive Industry demonstrated by recent delivery on time and budget A good understanding of BIW stampings/casting design, manufacture and assembly Excellent communication skills at all levels within the business and suppliers including PC literacy - Microsoft Project, Experience Required: Successful history of project management and launch within an Automotive environment, preferably with tailgate/doors and trim components. Education Required: Ideally Degree qualified Additional Information: This role will require the candidate to work remotely from the core engineering team and needs to be able to effectively communicate issues to ensure an accurate and timely response.

Contract / Gaydon, Warwickshire

Bill of Design Lead Engineer - 34977

Position Description: Lead Engineer. Bill of Design Skills Required: Previous experience/knowledge of the Body Engineering environment is desirable for this role, but not essential. Engineering knowledge of Body Engineering systems, component design, function, performance, production and manufacturing requirements Be capable of engineering complex parts and / or assemblies, with particular consideration of part to part interfaces and relationships, including CAE, AVA, DFM and DFA requirements Experience Required: The successful candidates should be able to demonstrate a design flair and the ability to be able to engineer a range of solutions to a design problem. Experience of investigative tools and methods to resolve complex system issues Effective communicators and strong organisational and numerical skills Education Required: Ideally educated to Degree Level or equivalent

Contract / Gaydon, Warwickshire

Perceived Quality Body Engineer - 34983

Position Description: The Perceived Quality department within Body Engineering is responsible for defining the customer requirements, for emotional and sensory interaction and emotional connection for products. This is defined by sub-attributes of 'Crafted' 'Design', 'Ambient lighting' and 'Material Ingredients'. The Body Engineering Department is responsible for the Engineering of the Body, including Lamps. Mirrors Bumpers, and Trim, as well as the Interior Cockpit (Instrument panel and Console), and Cabin (Headliner, trunk, pillar trims). The time line and frame work of the Body Engineering works to the G.P.D.S time lines and delivery. Programme Lead for the Perceived Quality Cosmetic standards. Working on Special Vehicle Operations (SVO) Products but reporting on a day-to-day basis to the quality manager within core Body Engineering. Skills Required: Excellent communication, interpersonal skills, self-confidence and a 'passion for the product' are personal qualities needed to succeed in this high pressure environment, being self-motivated and able to deliver with minimum supervision. Be able to demonstrate the ability to lead the resolution of technical issues (and associated business cases) within a team environment with the ability to interface directly to the Design teams, component areas, manufacturing, company quality, new model programs, and represent the Perceived Quality Department. Experience of program or project management, meeting demanding timescales, cost effective delivery essential. Experience Required: Be able to demonstrate the ability to lead the resolution of technical issues (and associated business cases) within a team environment with the ability to interface directly to the Design teams, component areas, manufacturing, company quality, new model programs, and represent the Perceived Quality Department. Excellent communication, interpersonal skills, self confidence and a 'passion for the product' are personal qualities needed to succeed in this high pressure environment, being self motivated and able to deliver with minimum supervision. Strong analytical skills, with high creativity levels and a good understanding of modern and future technologies. History of working or leading projects will be a distinct advantage. Experience of program or project management, meeting demanding timescales, cost effective delivery essential. Computer literate in Google, PowerPoint, Excel and Microsoft Project Education Required: Applicants need to be ideally qualified to Degree level Additional Information: The role will require regular inter-site travel therefore, it is expected that candidates will hold a valid UK Drivers licence . Locations: Gaydon and travel to other suppliers

Contract / Gaydon, Warwickshire

Research Engineer - Automotive Body Components 33388

Position Description: Project Engineer to run a number of technical projects to successfully manage and develop composite technologies in-line with Research maturation processes in order to successfully roll-out technology for use in vehicle Body Construction. Skills and Experience Required: Experience in engineering body components (structures or trim). Research Project Management Automotive BIW Experience / BIW Assembly Experience / Composites Experience / Research / Experiments and Testing Experience of composite CF or other similar technologies and test validation programmes useful. Experience of mechanical joining technologies for Automotive BIW useful Education Required: Minimum qualification - graduate with Degree or MSc.

Contract / Warwickshire, England

ADAS Lead Engineer - 33865

Position Description: The role of ADAS Lead Engineer is based within the ADAS Systems & Subsystems Engineering group in Electrical Engineering. The Lead Engineer will be responsible to manage the planning, the CCB and the associated costs of all the system and subsystems deliverables required to deliver driver assistance features based on video and ultrasonic technologies such as Remote Control Drive, Remote Parking, Park Aid etc. They will also need to interact with a lot of stakeholders (suppliers, system and subsystem engineers, AML teams), be diplomatic and proactive so as to progress as a priority in the organisation the delivers on time with the right quality and the expected cost. Skills Required: Project Management (including supplier Management) CCB and cost tracking Automotive system knowledge Experience Required: Experience in Automotive Engineering Experience in Driver Assistance Systems or comparable complex systems (e.g. Infotainment, Chassis Control, Powertrain) Experience in program/project management Experience with tools such as MS Project, Sharepoint, able to produce synthetic information and scorecards Strong oral and written communication & IT skills Highly disciplined, analytical and self-committed. Driven by passion for the automotive product UK Driving licence or equivalent

Contract / Warwickshire, England

Vehicle NVH Engineer - 33862

Position Description: This position will be responsible for leading and completing NVH issue resolution during the hardware phases of vehicle development up to Final Engineering Confirmation. We are looking for an experienced NVH engineer to join an established NVH Technical team to increase our capability to deliver a wider range of vehicle programmes. The resolution of complex NVH Technical Issues is essential to ensure the Premium vehicle attribute is delivered for Powertrain, Wind and Road Noise and Vibration, whilst ensuring efficient strategies are employed to support weight and cost requirements. The successful candidate will have an in depth knowledge of NVH principles and techniques and a proven track record in NVH issue resolution. Skills Required: Extensive experience in NVH with proven record of defining, investigating and resolving complex NVH issues. Highly literate at using LMS TestLab (or similar) software for acquisition and analysis. Full UK driving licence (or transferable equivalent) Experience of working in NVH in the Automotive Sector Good subjective and objective evaluating skills Good communication and presentation skills to communicate clear recommendations and conclusion to the issue resolution team. Education Required: Minimum of Bachelor Degree in Engineering, Mathematics or Physics

Contract / Warwickshire, England

Lead Engineer (Door Cladding) - 34165

Position Description: Lead Engineer covering Door Cladding Moulding / Door Finishers. Skills Required: CAD Catia V5 and V6 Experience in side door BIW / Exterior Finishers / Mechanisms with experience in Glass and Plastic / Aluminium Extrusions, Pressings and Injection Mouldings Project management skills. Timing and supplier management Experience Required: Good working knowledge of delivering quality systems. Problem resolution technique, Green belt and FMEA Must have a quality mind set with experience of launch. Have practical hands on experience with side door packaging / component design through to a production release Education Required: Degree level or the relevant experience

Contract / Warwickshire, England

Research Engineer - Vehicle Telecoms 34229 -

Position Description: The Research department develops new technologies and features for vehicles up to Concept Ready, thoroughly developing concepts and proving them out before handing over to mainstream engineering functions for productionisation. The Research department uses a robust technology delivery system, called Technology Creation Development System' (TCDS). This is applied to most programme technology delivery projects. Another framework, called 'Milestone', is used for projects such as University Research, Blue Sky Research and feasibility including proof of technical concept studies. There now exists an exciting opportunity for a dynamic and enthusiastic Engineer within the Future Electrical Vehicle Architectures team. This team is focused on the development of a new and flexible electrical architecture concept that will enable the Autonomous, Connected and Electrified vehicle features of the future. The engineer will be responsible for running a number of projects themselves under the guidance of the Research Leads. The outputs of the projects could range from bench top demonstrations, to full proof of concepts within a vehicle as appropriate and showcasing these to the Seniors in the company as required. Alongside this a high level of engineering capability will be required to ensure the concepts are well defined and realisable when taken forward to production. Project covers all stages of technology product development, with a specific focus on future vehicle architectures: Customer and system level requirements gathering, Competitor benchmarking and literature review, Data collection and analysis, Software and hardware (electronics) development to test and prove out concepts, Validation and trials. Skills and Experience Required: Graduate degree in Computer Science, Mathematics/Statistics, Electronics/Mechatronics/Robotics, Telecoms or similar. Strong knowledge in one or more of the following areas CybersecurityTelecomms 4G/5G technologies Cloud comms/telematics/V2X Functional Safety Vehicle Networks / Ethernet technologies / Networks tolopogies Programming experience (Python/C++/C#/Java/Matlab) Have a proven track record of delivering complex projects to agreed timings, the ability to lead to resolution the key strategic and technical issues within a team environment and be able to work with minimal supervision to drive forward all projects within the team. Working with and managing external companies/institutions to leverage the best technologies and knowledge. Proactively identifying and progressing future collaboration and project opportunities Experience of Systems Engineering and Failure Mode Avoidance techniques. Have worked within a research/advanced engineering environment. Delivered work on a research project (either academically, or within industry). Knowledge of the TCDS process and deliverables.

Contract / Warwickshire, England

Door System Lead Engineer - 34969

This position presents an exciting opportunity to become part of a unique and evolving department within Body Engineering, developing advanced feature strategies and leading content delivery across many programs. In this role you will be exposed to a variety of components, systems, suppliers and cross PD functions, playing a key part in creating and driving robustness and quality into the moving glass and side door systems team. Reporting to the departmental Group Leader and/or Programme Module Leader within Door system area, the Lead Engineer will potentially work across all of the Door commodities. Key Responsibilities Lead definition & design activities from PS through to Job 1, managing the Module Business Teams and interfacing with engineering, purchase, programme team, marketing and manufacturing functions, plus tier 1 and tier 2 suppliers. Management of and liaise with other adjacent stakeholders and functions, including suppliers, to ensure system compatibility issues are resolved according to cost and time targets. Support system strategy development for components and features. Develop and maintain local processes and metrics. Delivery of the Body Engineering functional scorecard." Experience required: Previous experience/knowledge of the Body Engineering environment is essential for this role. Knowledge of Product Development and business; processes and systems. Engineering knowledge of Body Engineering systems, component design, function, performance, production and manufacturing requirements. A good understanding of the change management process (PACN and WERS processes), Design Verification (RMDV), Design FMEA and AIMS processes would be advantageous." Be capable of engineering complex parts and / or assemblies, with particular consideration of part to part interfaces and relationships, including CAE, DFM and DFA requirements. The Lead Engineer should be able to demonstrate design flair and the ability to be able to engineer a range of solutions to a design problem. Experience of investigative tools and methods to resolve complex system issues Ideally educated to Degree level or equivalent." . Skills Required: Excellent first hand knowledge of component design principles within Side door Systems component Design, including component production techniques such as injection moulding / aluminium extrusion / Zinc Casting / TPE extrusion and mouldings. This will involve working with and across many diverse components such as Dynamic Body/Door Seals, Door Glass Run Seals, Body and Door Mounted finishers / Claddings and/or Glass Lift systems involving Glass and Regulators and/or Door mounted module plates among others. Project Management skills, delivery of project from concept to full production. Good communication & systems engineering skills approach to project development.

Contract / Gaydon, Warwickshire

Vehicle Communications Research Engineer - 34974

Lead engineer is required to run V2X Government projects such as UKCITE and UK Autodrive. To lead the technology development across members of the consortium's and internally. Oversee the scope, specifications, Technology Development, test procedures, commission and carry out bench, track and road trials to the full consortium members test requirements. To run demonstrations and carry out interviews to the press where needed. Then provide a full report of findings to the consortium which will include lessons learnt etc. Finally, to exploit technology from these consortium's with the aim to create patents and new ideas to use in their future cars. Experience required: Masters degree in the relevant subject such as communications protocols, design engineering, HMI. PhD would be beneficial. Full understand of 802.11p(DSRC) ITS-G5/C-V2X 3GPPv14+ (Uu/PC5)/LTE 3GPP(3G/4G) and 5G communication protocols. mmWAVE would be advantageous. Preferred skills: Prince2, Electronic Engineering, Cohda, Commsignia, dSpace environments. Antenna knowledge (Ham radio background) would be beneficial. Has project management experience on research projects. Has the ability to deliver technical projects within an ad-hoc environment (this is due to having so many consortium members with different ways of working). Understand Infotainment, CAN (CAM/DENM messages). Able to develop connected vehicle solutions in a high usage environment conforming to C2C/5GAA consortium and legislation requirements. Ultimately to optimise V2V performance vs driver expectations and update management/business on progress. Experience on merging V2X data on an autonomous vehicle would be beneficial. Experience of working on V2X (Vehicle-to-Vehicle, Vehicle-to-Infrastructure, Vehicle-to-Networks, Vehicle-to-Phone etc.) communications features, Advanced Driver Assistance Features (ADAS), live traffic systems, Functional safety, cyber-security, User Experience/HMI would be beneficial

Contract / Warwickshire, England

Lead Engineer Plastics Exterior Systems 34703

Lead Engineer required to join the for Body Engineering you will be responsible for the delivery of vehicle exterior systems Experience required: Exterior systems experience (large scale injection mouldings with A class and decorative finishes) - function, performance, production & manufacturing requirements Successful history as a Project Engineer in the automotive sector, with plastic mouldings. Beneficial to include experience of the following finishes - painted, high end self-coloured finishes, chrome plating, hot foil stampings, PvD CAD Literacy ability to manipulate and interrogate CAD data and use associated visualisation tools. Proven Project management capability demonstrated by recent delivery on time & budget of complex engineering systems Excellent communications skills. Demonstrated ability to communicate at all levels PC Literacy Microsoft Project, Power Point, Excel, Word etc" Education Ideally degree educated

Contract / Gaydon, Warwickshire

Human Factors Engineer - 33481

Position Description: Based in the Design Studio at our Research and Development facility in Warwickshire, as part of an expanding Human Factors team, this role is to deliver the human factors requirements for new automated driving features for future products. This will involve working directly with other stakeholders to help define and influence the feature definition. The position will require the delivery of high quality specification documents that are clear and unambiguous. Skills Required: 3 KEY SKILLS Sound understanding of Human Factors and Ergonomic design principles for user Interfaces. Self-motivated and able to work with management support within the local team and interfacing across business functions. Ability to coordinate and run user trials to gather objective data to support Business decision making and detail design. Statistical analysis, problem solving & root-cause analysis including idea generation and issue resolution Clear and concise communicator. Ability to produce formal documentation to a professional standard. Ability to manage projects and deliver to short timescales & deadlines. Experience Required: Human Factors / Ergonomics role within a consumer based Product Development environment to include concept development, assessment and user trialling AND/OR Human Factors Qualification with project based experience in Product development environment Education Required: Higher qualification in related discipline (e.g. MSc/PhD Human Factors, Ergonomics, Applied Psychology, Product Design, etc)

Contract / Warwickshire, England

Lead ADAS Engineer 34035

Position Description: The role of ADAS Lead Engineer is based within the ADAS Systems & Subsystems Engineering group in Electrical Engineering, The ADAS Systems & Subsystems group is responsible to complete all the system engineering deliverables required to design and deliver driver assistance features based on video, radar and ultrasonic technologies such as Lane Departure Warning, Lane Keeping Assist, Automatic High Beam control, Intelligent Emergency Braking, Traffic Sign Recognition, Intelligent Speed Limiter, Rear View, Junction View, Cross Traffic Alert, 360 degree Plan View, Lane Change Merge Aid, Park Assist, Adaptive Cruise Control, Traffic Jam Assist, Highway Assist Manage and coordinate the design, development, testing and introduction of new systems and components (commodities). Operating in a cross-functional organisation, Lead Engineers will direct report into Group Leaders and where delivering on specific vehicle programmes have an additional matrix report into Module Leaders. Skills Required: Project / programme management Requirements Management System Engineering The successful applicant will need the following skills and qualifications: Delivering the commodity plan to QCT WERS releasing to support the above commodity Ensuring all programme design solutions meet: Programme targets for cost and weight. Legal regulations & RMDV requirements. Optical Quality and PCPA requirements. Management of the design responsible supplier teams in support of delivery of the programme milestones Keeping all Module documentation up to date including: Meeting minutes Foundation & Programme DFMEAs Quality history & Bill of design Manage Change Request and expenditure forecasting Creation & maintenance of vehicle test plans - detail planning of test & development Manage vehicle development testing to sign off - supporting engineering test teams with issues Resolve issues with component engineering and vehicle attribute teams to develop designs that meet targets Ensure all appropriate standards are met through-out design maturation Provide input into new feature development Manage and resolve issues, escalating where required Own and deliver the Engineering APQP deliverables (to complement the STA Engineer APQP deliverables).

Contract / Warwickshire, England

Vehicle Door Plate Lead Engineer - 34245

Position Description: Lead Engineer covering Door Module Plate / Door Finishers. Skills Required: Catia V5-V6 CAD Experience in side door BIW / Exterior Finishers / Mechanisms, with experience in Glass and Plastic / Aluminium Extrusions, Pressings and Injection Mouldings Project management skills. Timing and supplier management Experience Required: Good working knowledge of delivering quality systems. Problem resolution technique. Green belt. FMEA Must have a quality mind set. Have practical hands on experience with side door packaging / component design through to a production release, with experience of launch. Education Required: Degree standard or relevant experience

Contract / Gaydon, Warwickshire

Cabin and Cockpit Lead Engineer - 34237

The role involves leading , and supporting design/development Interior trim assemblies,components,systems for future vehicle programmes. This includes Cabin Trim / Cockpit trim . As a Lead Engineer you will be leading the introduction and development of new and modified features requested by project teams and end user customers.The candidate will interface with both tier 1 suppliers and internal departments to ensure targets are met in the development of components for Interior Trim enhancements . MUST HAVE Engineering Design/ Development background within Automotive Trim or similar for Interior components, ideally having worked within both OEM and Tier 1 trim suppliers . Experience Required: Engineering Design/ Development background within Automotive Trim or similar for Interior components, Proven automotive Interior trim experience, s working in industry at OEM or Tier one suppliers. Has broad experience with Cabin or Cockpit product delivery. Can show good knowledge of working with multiple component range for Interior trim Evidence with clear understanding of hard and soft trim delivery. Experience with Low to medium volume tooling experience including emerging technology applications Ideally degree educated

Contract / Coventry, West Midlands

NVH Powertrain Engineer - 34624

Position Description: Deliver the Powertrain NVH attribute of all Powertrain commodities Support delivery of the Powertrain NVH attribute across all Powertrain systems. Taking the lead for planning, NVH testing, measurements, rig preparation, part procurement & data processing. Leading cross-functional communication and support from other attribute and commodity departments to deliver NVH testing and analysis requirements as necessary. Skills Required: Background in NVH measurement, practice and analysis essential, using industry standard instrumentation and tools (Bruel & Kjaer, DJ Birchall, LMS etc.) to acquire data direct to LMS front end (SCADAS), PROSIG and/or TEAC DAT recorder. Carry out subsequent analysis of data using LMS, draw conclusions and report work, attend progress meetings. Would be required to work in a team environment. Candidate should have a proven ability to make appropriate measurements, assess data, draw considered conclusions, and advise subsequent actions. Background in NVH measurement, practice and analysis essential, using industry standard instrumentation and tools (Bruel & Kjaer, LMS etc) to acquire data direct to LMS front end. PROSIG / Squadiga experience would be useful. Carry out subsequent analysis of data using LMS, draw conclusions and report work, attend progress meetings. Ability to effectively communicate across multi-disciplinary departments. Would be required to work in a team environment. Ability to work under pressure to tight time scales. Field experience would be an advantage. Experience Required: NVH measurement and analysis, preferably in automotive/powertrain environment. Specific Powertrain NVH experience; any of the following areas: engine, intakes, exhaust, calibration, transmission and driveline. Proven report writing skills. Education Required: Undergraduate Degree / Diploma, in Engineering/Automotive/Acoustics.

Contract / Warwickshire, England

Plant Vehicle Technician (PVT) Engineer - 34707

Position Description: Position is for a Body PVT Engineer, based in Halewood. The role i will be part of the inhouse Body Engineering team. Skills Required: Ability to use Structured Problem Solving skills. Experience with Problem Solving techniques, such as Six Sigma, 8D, PDCA. Able to work cross functionally and overcome roadblocks to be able to manage and introduce changes to a mass production process. Able to analyse customer data, develop engineering improvements, and manage overall Engineering changes to improve overall quality performance Must be able to work in a high paced, and demanding environment. Needs to be able to work cross functionally, and present at all levels (associate to Director level). Experience Required: Experience of working in an automotive design / manufacturing environment. Education Required: Minimum of HNC Engineering qualification.

Contract / Halewood, Merseyside

Instrument Panel Lead Engineer - 34799

Position Description: Instrument Panel Lead Engineer required to cover long term sick cover To lead the architectural design of the Instrument Panel Prepare RFQ's to go out to supply base Lead the day to day project activities. Liaise with Design, OQ, AME, purchase and programme teams. Requiring high levels of technical knowledge as well as managerial expertise. Skills and Experience Required: Previous experience of leading the resolution of business, technical and process issues within a Project Team environment A good working knowledge of product creation & delivery, change control, product definition and change management processes Ability to demonstrate good knowledge of Cockpit system design, function and performance. Ability to demonstrate experience of Cockpit system component production and manufacturing technologies. Proven Project management capability demonstrated by recent delivery to cost, quality and timing targets. Excellent communication skills with evidence of ability to communicate at all levels. CAD capability desirable (Catia V5 / V6) and ability to use associated visualisation tools. Significant experience in use of engineering tools including FMEA, Six Sigma problem resolution etc. Education Required: Degree or relevant equivalent experience preferred

Contract / Gaydon, Warwickshire

Lead Engineer - electromechanical 34706

As a Lead Engineer, you'll manage and coordinate the development, testing and implementation of new systems and components. You will carry out structured engineering tools and processes, in a cross-functional organisation, in order to deliver the targets and objectives, in terms of costs, delays, quality and attributes. You will be involved in the development of the features involving complex electromechanical mechanisms. You will focus on doors systems and be involved in the development of the system You will manage the way those parts interact with each other and the way they interact with the body and with the electrical architecture, across a range of new and exciting vehicle programmes. You will work closely with a range of specialist departments and external companies. With excellent communication and relationship building skills, you will be able to lead the coordination of a diverse set of tasks. Skills Required: Previous experience in engineering of electromechanical commodities, including design verification/validation, logical and methodical approach to component applications, verification and validation. Experience of engineering in Automotive Door System environment Knowledge of the processes of injection - stamping - assembly Microsoft Project, Office tools Catia V5/V6 TCe / Enovia Education Required: Degree level or equivalent

Contract / Gaydon, Warwickshire

Cabin and Cockpit Lead Engineer - 34238

The role involves leading , and supporting design/development Interior trim assemblies,components,systems for future vehicle programmes. This includes Cabin Trim / Cockpit trim . As a Lead Engineer you will be leading the introduction and development of new and modified features requested by project teams and end user customers.The candidate will interface with both tier 1 suppliers and internal departments to ensure targets are met in the development of components for Interior Trim enhancements . MUST HAVE Engineering Design/ Development background within Automotive Trim or similar for Interior components, ideally having worked within both OEM and Tier 1 trim suppliers . Experience Required: Engineering Design/ Development background within Automotive Trim or similar for Interior components, Proven automotive Interior trim experience, working in industry at OEM or Tier one suppliers. Has broad experience with Cabin or Cockpit product delivery. Can show good knowledge of working with multiple component range for Interior trim Evidence with clear understanding of hard and soft trim delivery. Experience with Low to medium volume tooling experience including emerging technology applications Ideally degree educated

Contract / Warwickshire, England

Vehicle Cabin Systems Lead Engineer - 34942

Position Description: This position presents an exciting opportunity to become part of a unique and evolving department within Body Engineering, developing advanced feature strategies and leading content delivery across many programs. In this role you will be exposed to a variety of components, systems, suppliers and cross PD functions, playing a key part in driving robustness and quality into the cabin systems team. Reporting to the departmental Group Leader and/or Programme Module Leader within Cabin area, the Lead Engineer will potentially work across all of the cabin commodities. Key Responsibilities: Lead definition & design activities from PS through to Job 1, managing the Module Business Teams and interfacing with engineering, purchase, programme team, marketing and manufacturing functions, plus tier 1 and tier 2 suppliers. Management of and liaise with other adjacent stakeholders and functions, including suppliers, to ensure system compatibility issues are resolved according to cost and time targets. Support system strategy development for components and features. Develop and maintain local processes and metrics. Delivery of the Body Engineering functional scorecard. Skills Required: Project Management skills, delivery of project from concept to full production. Knowledge of component design principles including component production techniques such as injection and compression moulding Good communication & systems engineering skills approach to project development. Experience Required: Be capable of engineering complex parts and / or assemblies, with particular consideration of part to part interfaces and relationships, including CAE, DFM and DFA requirements. Able to demonstrate design flair and the ability to be able to engineer a range of solutions to a design problem. Experience of investigative tools and methods to resolve complex system issues An effective communicator and have strong organisational and numerical skills. Education Required: Ideally educated to Degree level or equivalent

Contract / Gaydon, Warwickshire

Sensor Systems Research Engineer - 34934

Position Description: Research into sensor systems for autonomous vehicles Skills Required: 1) An understanding of optical systems - lidar and camera systems and image processing techniques 2) An understanding of advanced driver assistance features and vehicle electrical architectures, CAN Bus, potential Ethernet solutions 3) A practical Electronics Engineer - able to interface sensors to computer systems, acquire and analyse data and benchmark sensors Experience Required: Extensive experience following first Degree or a Masters or PhD in a relevant area Experience of lidar, cameras and radar and their uses in automotive ADAS systems.7 Linux experience an advantage as well as some ROS experience Matlab, C, C++ and Python programming skills Some GPU programming (CUDA) would also be good but not essential

Contract / Warwickshire, England

Autonomous Vehicle Research Engineer - 34933

Position Description: "You will be working in the research and advanced technology area, specifically within the Autonomous vehicle research team, which is a team of around 15-20 people. The main purpose of this team is to develop features and technologies to push autonomous vehicle development forward. The team is generally focused on delivering features and technology through software, with a systems engineering focus. Other areas of research are investigating the sensors and hardware required for autonomy. This particular role is largely based around developing and understanding the technologies and features the team want to develop and developing the detailed requirements about how they will function and how they can be realised. This is achieved, through use of user requirements understanding and modelling (using industry standard tools such as Rational Rhapsody,) and turning these into traceable requirements. Understanding of overall project management and software development in modelling languages (such as Matlab/Simulink) would be helpful, but not essential. " Skills Required: 1) Systems engineering 2) Requirements management 3) Project management Experience Required: Experience of working as part of a project team. Experience of stakeholder management Education Degree qualified in either engineering, computer science or equivalent experience Experience of software projects (either as a requirements authorm, project manager, system engineer, or architect)"

Contract / Warwickshire, England

Instrument Panel Project Engineer - 34284

Position Description: Project is planned to be an in-sourced engineering programme - requiring high levels of technical knowledge as well as managerial expertise. Skills Required: Previous experience of leading the resolution of business, technical and process issues within a Project Team environment A good working knowledge of product creation & delivery, change control, product definition and change management processes A good working knowledge of product creation & delivery, change control, product definition and change management processes Experience Required: Extensive experience as a Cockpit Lead Engineer good knowledge of Cockpit system design, function and performance. Ability to demonstrate experience of Cockpit system component production and manufacturing technologies. Proven Project management capability demonstrated by recent delivery to cost, quality and timing targets. Excellent communication skills with evidence of ability to communicate at all levels. CAD capability desirable (Catia V5 / V6) and ability to use associated visualisation tools. Significant experience in use of engineering tools including FMEA, Six Sigma problem resolution etc. Strong PC literacy including Microsoft project, Power point, Excel, Word etc. Education Required: Degree or relevant equivalent experience preferred

Contract / Warwickshire, England

ADAS Supplier Assessment Engineer - 34905

Position Description: There is business need to deliver pre-development activities for ADAS / Automated driving features and systems. ADAS and Autonomous Driving are one of the key technology challenges for the business moving forward. As such it is critical that we improve our technical capability and ensure that we have robust architecture, commodity and feature plans that allow the delivery teams within Product Engineering to operate efficiently. This means putting more focus and effort into pre-development work streams to ensure we keep pace with the competition. Among pre-development activities is the assessment of suppliers and partners. Supplier assessment engineer will support these activities, by providing reports on supplier activities. This will be achieved by actively meeting them and assessing their technology. It involves physical component testing and therefore integration in target vehicle and test preparation and reporting, together with the component engineer. Engineer will need to be able to work in other pre-development activities. Skills Required: Experience in Automotive Engineering and, specifically, experience in Driver Assistance Systems or comparable complex / safety relevant systems Knowledge of vehicle networks and basic architecture Experience in vehicle integration / testing Experience Required: Experience of ADAS feature development and delivery through all stages of the engineering development "V" cycle Programming capabilities - basic scripting, test procedures Knowledge of MS Office Applications (Word, Excel, Powerpoint, Project) Full UK driving license ADAS testing and validation experience Education Required: Degree in Electronics, Software, Automotive / Aerospace engineering or similar subject, or equivalent industry experience

Contract / Gaydon, Warwickshire

Project Support Engineer - 34893

Position Description: As a Project Support Engineer within Special Vehicle Operations (SO) Division you will be responsible for a variety of technically biased tasks, working to support engineers and managers. You will need to work with personnel from other departments and functions, and possibly with external companies. The platform engineering team works with the engineering teams to ensure that key deliverables are met to quality and time. The Platform team is involved from Pre Programme Start through to Mass Production. As a Project Support Engineer you will be an essential part of this, supporting the day to day activity of the platform team as well as supporting key programmes. Skills Required: Knowledge of general engineering principles relevant to the design, development, testing and manufacture of technically engineered products. MS Office and PC literate Excellent communication skills: Ability to negotiate with other functions to achieve mutually beneficial solutions. Experience Required: Knowledge of the design and development of new automotive products. Knowledge of manufacturing processes, particularly tooling methods and lead-times. Knowledge of materials used in modern vehicles (e.g. plastics, metals, composites and paint). Education Required: It is anticipated candidates with be educated to Degree Level in a relevant engineering or science based subject, or HNC/ HND with significant experience.

Contract / Coventry, West Midlands

ADAS Modelling and Simulation Engineer - 34871 -

Position Description: The ADAS Modelling and Simulation Lead Engineer will lead and participate in the development of an ADAS Simulation Platform supporting the Pre-development System and Subsystem activities (Requirements and Proof of concept). In order to achieve his mission, the Engineer will have to: Understand the System Engineering process, from early stages, initial feasibility and concept proving studies to system design development Understand the predevelopment and development System design activities (from high level requirements to subsystems/sensors, going through system behaviour, driver interaction, system requirements) Lead and participate in the modelling and simulation activities to develop our platform Define the overall framework of a global platform and the simulation framework. Develop the Simulation framework and manage evolution and maintenance Develop and manage a set of Model library (Functions, Sensors, Actuators) develop in house or not. Ensure the integrity and the performance of the simulation tool interfaces of this platform. Coordinate the activities (Specification, Modelling, simulation, testing, Analysis, reporting) in-house with the help of relevant departments and outside with our partners. Define and participate in the development of needed software/Hardware interfaces between the simulation platform and vehicle prototype software platforms Skills Required: Modelling and Simulation skills and their relevant tools System Engineering LifeCycle sensors knowledge and physics behind it Experience Required: Knowledge of Matlab and Simulink Knowledge of Carmaker Experience in defining software interfaces between different platforms (e.g. interfaces between CarMaker and Matlab) and ability to perform integration with the needed test levels successfully Experience in integrating and configurating models, interfaces and simulation tools to create a complete ADAS platform. Experience in Implementing and testing the ADAS scenarios Experience in technical coordination of Complex Projects in Virtual Environment with good communication skills so as to interact with a lot of stakeholders.

Contract / Gaydon, Warwickshire

Vehicle Platform ADAS Project Manager - 34874

Position Description: There is business need to deliver pre-development activities for ADAS / Automated driving features and systems. ADAS and Autonomous Driving are one of the key technology challenges for the company moving forward. As such it is critical that we improve our technical capability and ensure that we have robust architecture, commodity and feature plans that allow the delivery teams within Product Engineering to operate efficiently. This means putting more focus and effort into pre-development work streams to ensure we keep pace with the competition. Among pre-development activities is the preparation and build of working prototypes. The vehicle platform project manager will take care of the appropriate management of all the activities related to the vehicle builds, including supplier management, vehicle commissioning and tracking, cost and management track and follow, etc. Engineer will need to be able to work in other pre-development activities planning activities Skills Required: Experience with complex project management; Supplier management; Requirements management; Timing management; Cost tracking; Team management Knowledge of vehicle networks and basic architecture Experience in Automotive Engineering and, specifically, experience in Driver Assistance Systems or comparable complex / safety relevant systems Experience Required: Experience of ADAS feature development and delivery through all stages of the engineering development "V" cycle Requirements and change management tools and processes, software version control, control strategy documentation Strong organisational, project management and communication skills essential Knowledge of MS Office Applications (Word, Excel, Powerpoint, Project) Full UK driving license Must be eligible to work within the UK without sponsorship Education Required: Degree in Electronics, Software, Automotive / Aerospace engineering or similar subject, or equivalent industry experience

Contract / Gaydon, Warwickshire

Powertrain NVH Engineer

Senior Powertrain NVH Engineer SALARY: £36,500 -£46,500 LOCATION: Gaydon, Warwickshire WHAT TO EXPECT Using state-of-the-art facilities, you'll provide the power behind our vehicles working in our Powertrain Engineering team. You'll find the ideal balance between performance and sustainability while responding to the environmental issues that shape our industry. As the Lead NVH Engineer, you'll be responsible for delivering the Powertrain NVH attribute to the Vehicle Engineering teams. You'll engineer the attribute using the APC and PCS processes and work closely with Vehicle NVH, Powertrain component owners, the CAE team, and suppliers. In your role, you'll work on all aspects of the Powertrain: engines, intakes, exhausts, transmissions and driveline, fuel and cooling systems, including engine and transmission calibration. WHAT YOU'LL NEED A proven background in NVH measurement and data analysis Able to utilise industry-standard instrumentation and tools (such as Brüel and Kjær, LMS) a Collect, analyse, and interpret data as well as drawing conclusions, reporting, and presenting work. Have effective planning, organisation, and communication skills at all levels of the business, including the ability to lead a team or work independently where required. Degree BENEFITS Bring all this to the home of premium innovation, and you'll find the opportunities to further your career with a world-class team, a discounted car purchase and lease scheme for you and your family, membership of a competitive pension plan, and a performance-related bonus scheme.

Permanent / Gaydon, Warwickshire

Door Systems Lead Engineer- 34842

Position Description: Lead Engineer for Body Engineering Door Systems (Door Casings) for forward model programmes Skills Required: Knowledge of automobile interiors and ideally door systems such that door casings can be developed. Excellent communications skills. Demonstrated ability to communicate at all levels within all functions and supplier base Proven Project management capability - demonstrated by recent delivery on time & budget personally and my management of suppliers Experience Required: Proven experience Engineering knowledge of automotive interior trim / door systems and their function, performance, production & manufacturing requirements. CAD Literacy - ability to manipulate and interrogate CAD data and use associated visualisation tools. Ability to generate CAD data in Catia v5/v6 would be an advantage. Proven supplier management skills. Significant experience in use of engineering tools such as FMEA, Six Sigma, problem resolution etc. Working knowledge of project delivery processes Working knowledge of change management processes Education Required: Degree or equivalent.

Contract / Gaydon, Warwickshire

ADAS Systems Engineer - 34821

Position Description: The Advanced Driver Assistance Systems (ADAS) and Chassis Electronics (CE) teams develop and deliver systems and features such as Lane Departure Warning, Lane Keeping Assist, Automatic High Beam control, Intelligent Emergency Braking, Traffic Sign Recognition, Intelligent Speed Limiter, Rear View, Junction View, Cross Traffic Alert, 360 degree Plan View, Lane Change Merge Aid, Park Assist, Adaptive Cruise Control, Traffic Jam Assist, Highway Assist, Driveline Controls, Terrain Response, Active Suspension, and various new technologies working towards the goal of autonomous driving. The role of ADAS System Engineer is based within the ADAS Systems & Subsystems Engineering group in Electrical Engineering, The ADAS Systems & Subsystems group is responsible to complete all the system engineering deliverables required to design and deliver driver assistance features based on video, radar and ultrasonic technologies such as Lane Departure Warning, Lane Keeping Assist, Automatic High Beam control, Intelligent Emergency Braking, Traffic Sign Recognition, Intelligent Speed Limiter, Rear View, Junction View, Cross Traffic Alert, 360 degree Plan View, Lane Change Merge Aid, Park Assist, Adaptive Cruise Control, Traffic Jam Assist, Highway Assist" Skills Required: Systems Engineering Requirements Management Systems Architecture Design Experience Required: Experience in Automotive Engineering or Aerospace Engineering Experience in Driver Assistance Systems or comparable complex systems (e.g. Infotainment, Chassis Control, Powertrain) Experience in logical system architectures, physical system architectures, functional allocation, functional and non-functional requirements design Experience with tools such as Doors, Rhapsody, MatLab/Simulink, CANalyser, CANoe Strong oral and written communication & IT skills Highly disciplined, analytical and self-committed. Driven by passion for the automotive product UK Driving licence or equivalent Six Sigma Green Belt qualification desirable Education Required: Systems Engineering/Systems Engineering Management Degree / Additional Information: Position will be based at Gaydon but candidate will be required to travel to other sites - Whitley, Castle Bromwich, Solihull, Halewood and also suppliers and should have an appropriately insured vehicle (expenses will be reimbursed)

Contract / Gaydon, Warwickshire

Data Protection Project Manager - 34648 -

Position Description: Project status Whole VDS Vehicle delivery planning activities Set up of intranet site to accept signals integration GPDR 2018 Regulation compliance Data protection - security, data handling, personnel, privacy statements and policies Data types you can capture per market - In-market regulations Pre-delivery inspection compliance User HMI legal text. Skills Required: Project Management skills, Prince2, APMP, MBA Project Management tools: Full stack Microsoft office, Powerpoint presentations, technical papers Google docs, APIs Data Protection regulations for EU GDPR and RoW Experience Required: Project Management Skills - Prince2, APMP, Law LLB Awareness Experience of working with system design where connected devices are involved, meaning understanding how a device can communicate with a cloud as well as presentation on e.g. a mobile app Awareness of connectivity technologies 3G/LTE, Wi-Fi, BLE, GNSS, Ethernet, CAN, Android Awareness of "big data" related to Telematics, Autonomy, Mobility, Data analytics and Connected Services Knowledge of legal requirements for any data captured from the vehicle and sent to offboard server. Very strong written and verbal communication skills. Demonstrates strong presentation skills for programme, project reviews Awareness of agile s.w programmes deliver Education Required: BSc or higher Engineering Degree in Automotive, Electrical, Electronics, Mechatronics, or Computer Systems

Contract / Gaydon, Warwickshire

Instrument Panel Lead Engineer - 34790

Position Description: Instrument Panel Lead Engineer required to cover long term sick cover To lead the architectural design of the Instrument Panel Prepare RFQ's to go out to supply base Lead the day to day project activities. Liaise with Design, OQ, AME, purchase and programme teams. Requiring high levels of technical knowledge as well as managerial expertise. Skills Required: Previous experience of leading the resolution of business, technical and process issues within a Project Team environment A good working knowledge of product creation & delivery, change control, product definition and change management processes A good working knowledge of product creation & delivery, change control, product definition and change management processes Experience Required Ability to demonstrate good knowledge of Cockpit system design, function and performance. Ability to demonstrate experience of Cockpit system component production and manufacturing technologies. Proven Project management capability demonstrated by recent delivery to cost, quality and timing targets. Excellent communication skills with evidence of ability to communicate at all levels. CAD capability desirable (Catia V5 / V6) and ability to use associated visualisation tools. Significant experience in use of engineering tools including FMEA, Six Sigma problem resolution etc. Strong PC literacy including Microsoft project, Power point, Excel, Word etc Education Required: Degree or relevant equivalent experience preferred

Contract / Gaydon, Warwickshire

ADAS Systems Engineer - 31942

Position Description: To develop and deliver the EPAS system for vehicles, working in conjunction with the Chassis Team of Steering engineers. To work closely with the suppliers in a partnership to robustly deliver the required documents and product to the program timing. To work in conjunction with other departments to deliver the electrical architecture, functionality and connectivity of the EPAS system to align with the ADAS requirements. To create and ensure the documentation and internal trackers are raised and progressed through the mile stones of the delivery phases of development. To support the warranty investigations with detailed analysis of DTCs. To support the factory delivery and assembly of EPAS systems onto vehicles production and prototype. To plan the development tasks, track and report progress in weekly meetings. Skills Required: 1. System design experience, in developing and delivering system requirements, and working with suppliers to deliver the required functionality on time and to budget. 2. System communication bus structures and an understanding of bus protocols such as CAN and Flexray. 3. Relevant and recent experience of hardware design and delivery to demanding schedules. Experience Required: Previous experience with the design and delivery of Systems, Hardware, and Software End to end delivery of a product from conception through to delivery and end customer installation Working with suppliers on robust delivery plans Relevant degree or equivalent experience preferred Full UK driving licence Previous experience of leading the resolution of business, technical and process issues within a project team environment Component and system level issue investigations including appropriate problem solving and reporting tools (Six Sigma, 5D, Is / Is Not, Fault Tree etc)

Contract / Warwickshire